Rhepanol Roofing: Complete Guide to PIB Membranes
Rhepanol is a roofing membrane system made from polyisobutylene (PIB). A reliable estimate distinguishes its hfk and hg products, approved attachment methods, welded seams, edge details and whole purchase rolls. This

ROOF MEMBRANES · RHEPANOL (PIB)
Rhepanol is a roofing membrane system made from polyisobutylene (PIB). A reliable estimate distinguishes its hfk and hg products, approved attachment methods, welded seams, edge details and whole purchase rolls. This guide covers the decisions contractors need to make.
Rhepanol is neither EPDM nor PVC. hfk is a versatile fleece-backed PIB membrane used in different approved installation methods, while glass-fleece-reinforced hg is especially suited to green and ballasted roofs. Start with the complete FDT assembly; then verify roll formats, seams, details, wind design and real purchase prices.
What is Rhepanol PIB?
Rhepanol is a polyisobutylene roofing membrane. FDT presents it as a distinct system family with its own membrane types, accessories and details. It should not be treated as a generic rubber or PVC sheet. See the roofing-system comparison.
Measure the membrane separately from vapour control, insulation, falls, outlets, upstands and penetrations. On refurbishment jobs, assess the retained substrate first using our renovation planning guide.
Record the manufacturer, exact membrane, thickness, roll format, substrate and specified system in the job file.
Rhepanol hfk or hg?
Rhepanol hfk combines a PIB waterproofing layer with a fleece backing and hot-air weldable edge. FDT describes mechanically attached, partially bonded and ballasted applications where the assembly is suitable.
Rhepanol hg uses embedded glass fleece and is resistant to roots and rhizomes according to FDT. Green, gravel and terrace applications require an appropriate complete roof build-up, not only a root-resistant sheet.
Welded seams, adhesives and fixings
Compatible hfk and hg seams are welded with hot air following FDT instructions. Cleaning, trial welds, seam inspection and T-joint details matter. See our seam-welding guide.
Partial bonding requires approved FDT adhesive and substrates; read the adhesive guide. Mechanically fixed assemblies require a project wind-uplift calculation; see fixing Rhepanol. Never assume EPDM contact adhesive or PVC products are interchangeable.
An indicative screw count per square metre is not a fixing layout or wind-load design.
Rolls, ordering and costs
QRS lists grey hfk rolls 15 m long and 1.50, 1.00 or 0.50 m wide: nominal areas of 22.5, 15 and 7.5 m². Laps and cuts reduce useful coverage. See our roll calculation guide.
Compare the complete installed system rather than just a membrane €/m² price. Include rolls bought, attachments, details, labour, access and allowances. See costing Rhepanol and our sample bill of materials.
A 12 m² roof plus a provisional 10% allowance suggests 13.2 m² consumption. One 1.50 × 15 m hfk roll has a nominal 22.5 m², but its suitability still depends on the cutting plan.
From measurements to a workable roof plan
Record each roof field, edge, upstand, outlet, flashing and penetration. Our flat-roof calculation guide covers the basics; outlet specification and wall flashings need their own details.
Confirm current FDT/KOMO assembly documents, accessories and actual supplier stock. State provisional assumptions on the estimate and do not silently treat missing materials as free.
The DakCalc output is a provisional material schedule, not the final purchase order until the membrane layout is checked.
Estimate Rhepanol roof area, rolls and materials
Select PIB (Rhepanol), verify the hfk roll format and enter actual supplier purchase prices. DakCalc provides a provisional material estimate, not an approved laying plan, wind design or FDT system certification. Verify the delivered hg roll format and configuration.
Open the DakCalc calculator →More Rhepanol guides
Also useful in the knowledge hub: roofing system comparison, calculating membrane laps, roof-edge trims and corners.
Frequently asked questions
Is Rhepanol an EPDM membrane?
No. Rhepanol is PIB, with its own material and manufacturer system rules.
Which Rhepanol is designed for green roofs?
FDT specifically positions hg as a root- and rhizome-resistant membrane. The complete green roof needs its own design.
Can DakCalc estimate Rhepanol rolls?
Yes, provisionally for known hfk roll formats. Verify the true laying plan and purchase quantities before ordering.
Sources and technical documents
Product dimensions, adhesives, fixing methods and examples do not certify a roof assembly. Check current FDT/QRS guidance, local rules, project-specific wind design and your supplier quote before ordering.