← Back to knowledge hub
RHEPANOL & PIB ROOFING · 9 min

Rhepanol hg: Membrane for Green and Ballasted Roofs

Rhepanol hg is a PIB membrane FDT positions for green, gravel and other ballasted roofs. Its glass-fleece reinforcement and root-resistant design distinguish it from standard hfk, but the complete roof construction

ROOF MEMBRANES · RHEPANOL (PIB)

Rhepanol hg is a PIB membrane FDT positions for green, gravel and other ballasted roofs. Its glass-fleece reinforcement and root-resistant design distinguish it from standard hfk, but the complete roof construction still determines suitability.

Quick answer

FDT describes Rhepanol hg as resistant to roots and rhizomes and suited to extensive and intensive green roof applications. The membrane is 2.05 m wide, has hot-air welded seams and may be loose laid beneath specified ballast. Confirm supplied roll format, thickness, drainage, ballast and structural loads per project.

What distinguishes Rhepanol hg?

FDT describes hg as a PIB membrane containing embedded glass fleece, with root and rhizome resistance in the material and a sheet width of 2.05 m.

It serves green, gravel and terrace roof applications. Selecting the sheet alone does not establish structural capacity, drainage, insulation performance or roof-edge suitability.

Green roof layers and loads

Specify waterproofing, protection, drainage, filter, growing medium, vegetation and inspection access as needed. Evaluate saturated substrate mass, retained water and roof structural capacity rather than only dry material weight.

Retention roofs need water-level management and emergency drainage. Read flat roof outlets and emergency overflows and safety and wind design.

Practical note

Arrange structural and drainage checks before ordering the ballast or growing substrate.

Loose laying under ballast and connections

FDT describes loose laying using vegetation as ballast. Wind resistance must be proven through an appropriate system design; “loose laid” does not mean unrestrained.

Compatible hg seams are hot-air welded following FDT rules. Cleaning, weld checks, laps, protection and penetrations need detailed specification. See welded Rhepanol seams.

Estimate hg roll requirements

FDT states a 2.05 m sheet width. Verify the exact delivered product, thickness and roll length using current product documentation and a supplier quotation. Width alone cannot determine whole-roll ordering.

DakCalc flags a missing roll format instead of inventing an order. See how to estimate Rhepanol rolls and account separately for cuts and green-roof details.

Complete installation cost

Allow for hg membrane, welded seams, drainage, growing media, ballast, outlets, access and labour as separate items. The green-roof assembly may cost considerably more than the bare sheet.

See Rhepanol costs and the sample material schedule for a structured breakdown.

DAKCALC

Estimate Rhepanol roof area, rolls and materials

Select PIB (Rhepanol), verify the hfk roll format and enter actual supplier purchase prices. DakCalc provides a provisional material estimate, not an approved laying plan, wind design or FDT system certification. Verify the delivered hg roll format and configuration.

Open the DakCalc calculator →

More Rhepanol guides

Also useful in the knowledge hub: roofing system comparison, calculating membrane laps, roof-edge trims and corners.

Frequently asked questions

Is Rhepanol hg root resistant?

FDT describes the membrane as root and rhizome resistant. The overall green roof must still be designed as a system.

What is Rhepanol hg sheet width?

FDT specifies 2.05 m. Confirm the purchased roll length and thickness before ordering.

Is ballast always mandatory?

The actual fastening or ballast concept depends on the manufacturer-approved assembly and wind calculations.

Sources and technical documents

  1. FDT · Rhepanol hg: root-resistant membrane and loose laying
  2. QRS · Rhepanol hg productinformatie
  3. QRS · Verwerkingsrichtlijnen en beschikbare downloads Rhepanol

Product dimensions, adhesives, fixing methods and examples do not certify a roof assembly. Check current FDT/QRS guidance, local rules, project-specific wind design and your supplier quote before ordering.