Calculate Rhepanol Roofing: How Many Rolls?
Calculating Rhepanol starts with roof area, but a meaningful order requires the selected roll dimensions and a laying plan. On smaller roofs the nominal roll area and actual effective coverage may differ substantially.
ROOF MEMBRANES · RHEPANOL (PIB)
Calculating Rhepanol starts with roof area, but a meaningful order requires the selected roll dimensions and a laying plan. On smaller roofs the nominal roll area and actual effective coverage may differ substantially.
Measure the roof, choose the actual hfk width and length, allow for laps and cutting losses, then round to full purchase rolls. QRS lists hfk 1.50 × 15 m (22.5 m²), 1.00 × 15 m (15 m²) and 0.50 × 15 m (7.5 m²). Deduct usable whole rolls held in stock.
Measure the roof properly
Measure individual roof sections and sum length × width. Record L-shaped areas, rooflights, penetrations and potential sheet orientation.
See the complete roof calculation guide and note drainage details and wall junctions. These may require separate material.
Choose the correct hfk roll
QRS lists grey hfk in 1.50 × 15 m, 1.00 × 15 m and 0.50 × 15 m formats, with nominal areas of 22.5, 15 and 7.5 m². The stated 2.5 mm overall thickness includes fleece and does not determine usable sheet area.
The optimum roll width depends on roof geometry, sheet direction and seams. See the hfk product guide.
Account for laps, cuts and the laying plan
Side laps and ends require manufacturer-specific allowances, while penetrations and corners need additional cuts. Do not import a generic PVC or bitumen lap dimension.
Our membrane overlap guide explains net coverage. A percentage allowance is a useful first pass, not a substitute for a cutting plan.
On a narrow or complex roof, sheet layout may matter more than a generic 10% waste allowance.
Example: 12 m² to full rolls
A rectangular 4 × 3 m roof is 12 m². A provisional 10% allowance gives 12 × 1.10 = 13.2 m² theoretical consumption. This is not a verified laying plan.
One 1.50 × 15 m hfk roll contains nominally 22.5 m², so a first materials estimate can show one roll if there is no stock. With a 0.50 × 15 m format (7.5 m²), at least two nominal whole rolls are needed before confirming actual cuts and seams.
If one matching 1.50 × 15 m roll is already in stock, the new purchase is zero rolls, although stock material still has an accounting value.
Stock and full-roll purchase price
Deduct only suitable usable stock of the selected membrane variant. Order the remaining whole rolls, respecting any supplier pack multiple.
When the supplier quotes per square metre, multiply the real €/m² rate by the nominal full-roll area. Do not cost only the theoretical 13.2 m² when the purchase is a complete roll. See costing Rhepanol and the example material list.
What changes for Rhepanol hg?
FDT states an hg sheet width of 2.05 m. Confirm current roll format, thickness and specification before a firm purchase order. Stocklists and older product sheets can vary.
DakCalc flags a missing complete roll format rather than inventing quantities. See our hg guide.
Estimate Rhepanol roof area, rolls and materials
Select PIB (Rhepanol), verify the hfk roll format and enter actual supplier purchase prices. DakCalc provides a provisional material estimate, not an approved laying plan, wind design or FDT system certification. Verify the delivered hg roll format and configuration.
Open the DakCalc calculator →More Rhepanol guides
Also useful in the knowledge hub: roofing system comparison, calculating membrane laps, roof-edge trims and corners.
Frequently asked questions
How much area is in a 1.50 × 15 m hfk roll?
Nominally 22.5 m². Effective coverage depends on laps, cuts and details.
Why order one roll for 13.2 m² use?
A selected 1.50 × 15 m product is bought as a complete roll. The laying plan still needs checking.
Can hg rolls be estimated similarly?
Yes, once the full delivered roll dimensions and actual layout are confirmed.
Sources and technical documents
Product dimensions, adhesives, fixing methods and examples do not certify a roof assembly. Check current FDT/QRS guidance, local rules, project-specific wind design and your supplier quote before ordering.