Roofers' fire-prevention checklist
Record assembly, combustible layers, cavities, timber edges, skylights, cables, penetrations, upstands and old repairs. Investigate unknown layers before heating work. This article separates material performance, roof design and safe site procedures
FIRE SAFETY · FLAT ROOFS · DAKCALC KNOWLEDGE BASE
Record assembly, combustible layers, cavities, timber edges, skylights, cables, penetrations, upstands and old repairs. Investigate unknown layers before heating work. This article separates material performance, roof design and safe site procedures for working roofing teams.
Record assembly, combustible layers, cavities, timber edges, skylights, cables, penetrations, upstands and old repairs. Investigate unknown layers before heating work. Check NEN 6050, Dutch trade guidance and manufacturer details. Brief the team using the roof survey and work preparation.
Before starting: survey hazards
Record assembly, combustible layers, cavities, timber edges, skylights, cables, penetrations, upstands and old repairs. Investigate unknown layers before heating work.
Check NEN 6050, Dutch trade guidance and manufacturer details. Brief the team using the roof survey and work preparation.
Check: does each worker know the method and hazard at every junction?
Before hot work: equipment and permission
Inspect tools, hoses and connections as instructed. Remove combustibles, provide shielding and suitable extinguishers, and keep access clear.
Is a permit required? Are supervision, stop-work authority, alarms and fire-watch duties assigned? Read the permit guide.
Check: who stops work and who calls emergency services?
During work: reassess the situation
Unexpected insulation, cavities, opened roof edges, other contractors and changing weather may invalidate assumptions.
Stop when unsure, investigate and update the agreed method. See junction risks.
Check: are changed conditions recorded immediately?
After work: checks and handover
Inspect junctions as the job plan requires. Arrange checks of nearby spaces or later inspections where applicable. Record times, inspectors and findings.
Report smoke, unexplained heat or suspicious smells under the emergency procedure. Use the complete guide.
Check: was responsibility formally handed over?
Keep estimation and safety approval separate
Record roof area, edges, membrane, junctions and labour separately, including safe detail work and monitoring. A material schedule does not establish fire compliance.
See project planning and the material schedule.
Plan the roofing job
Record roof area, upstands, edges and selected materials in the calculator. A DakCalc estimate is not a fire-safety certificate, hot-work permit or approved roof detail.
Open calculator →Flat roof fire-safety article library
Start with the central guide, then choose the detail relevant to your project.
Related DakCalc guides: Roofing work preparation · Safe working on flat roofs · Calculate bitumen roofing · Flat-roof junction details · PIR, EPS and tapered insulation · Compare roofing membranes · Flat roof renovation · Solar panels on flat roofs · Calculate roof energy savings.
Frequently asked questions
Does this guide authorise torching?
No. Inspect the actual assembly and confirm applicable rules and conditions.
Do manufacturer instructions matter?
Yes. System compatibility and tested scope are essential.
Can DakCalc certify the fire safety of the roof?
No. DakCalc estimates quantities and costs, not engineering or fire compliance.
Sources and technical guidance
Sources reviewed on 20 November 2026. Check current wording, project conditions and manufacturer specifications.
- NEN — NEN 6050:2009, brandveilig werken aan gesloten dakbedekkingssystemen
- VEBIDAK — Vakrichtlijn Gesloten Dakbedekkingssystemen 2025
- VEBIDAK — Vakrichtlijn 2025 (PDF)
- NEN — NEN 6063:2019, brandgevaarlijkheid van daken
- Verbond van Verzekeraars — Brandgevaarlijke werkzaamheden
- Brandweer Nederland — Het juiste blusmiddel
- SOPREMA — Brandpreventie op platte daken
Practical information, not permission to carry out hazardous work. Apply current Dutch standards, building rules, risk assessment, insurer conditions and manufacturer instructions; stop when the construction or risk is unknown.