← Back to knowledge hub
FIRE SAFETY & ROOFING · 9 min

Roof system fire performance: bitumen, EPDM, PVC and Rhepanol

Depending on the product, bitumen systems may be torched, self-adhered or mechanically fixed. Follow the system method and use approved flame-free details at hazardous junctions. This article separates material performance, roof design and safe site

FIRE SAFETY · FLAT ROOFS · DAKCALC KNOWLEDGE BASE

Depending on the product, bitumen systems may be torched, self-adhered or mechanically fixed. Follow the system method and use approved flame-free details at hazardous junctions. This article separates material performance, roof design and safe site procedures for working roofing teams.

Quick answer

Depending on the product, bitumen systems may be torched, self-adhered or mechanically fixed. Follow the system method and use approved flame-free details at hazardous junctions. Assess underlay, capsheet, insulation and edges separately. Do not extend a torching method from the open field to concealed timber backing or façade cavities. See safe torching and bitumen estimating.

Bitumen: installation method is not roof classification

Depending on the product, bitumen systems may be torched, self-adhered or mechanically fixed. Follow the system method and use approved flame-free details at hazardous junctions.

Assess underlay, capsheet, insulation and edges separately. Do not extend a torching method from the open field to concealed timber backing or façade cavities. See safe torching and bitumen estimating.

EPDM reduces some torch work, not all hazards

Many EPDM systems use adhesives or tapes. Without a flame, immediate torch hazards may be reduced, while solvents, ventilation, storage and electrical tools still need controls.

Check the exact adhesive safety sheet and application rules. Compare membrane systems.

PVC and Rhepanol require their own procedures

PVC seams commonly use hot-air welding, which avoids a gas flame but uses high-temperature equipment. Rhepanol has its own system details; generic PVC instructions cannot be assumed suitable.

Verify compatible seams, trims, penetrations and fixings from the supplier.

BROOF(t1) applies to an assessed assembly

NEN 6063 concerns the external-fire hazard of roofs. BROOF(t1) classification is tied to a tested assembly and its conditions, not just the brand of a top membrane.

Check the specified deck, insulation, attachment and installation scope. Read Dutch standards.

DAKCALC

Plan the roofing job

Record roof area, upstands, edges and selected materials in the calculator. A DakCalc estimate is not a fire-safety certificate, hot-work permit or approved roof detail.

Open calculator →

Flat roof fire-safety article library

Start with the central guide, then choose the detail relevant to your project.

Related DakCalc guides: Roofing work preparation · Safe working on flat roofs · Calculate bitumen roofing · Flat-roof junction details · PIR, EPS and tapered insulation · Compare roofing membranes · Flat roof renovation · Solar panels on flat roofs · Calculate roof energy savings.

Frequently asked questions

Does this guide authorise torching?

No. Inspect the actual assembly and confirm applicable rules and conditions.

Do manufacturer instructions matter?

Yes. System compatibility and tested scope are essential.

Can DakCalc certify the fire safety of the roof?

No. DakCalc estimates quantities and costs, not engineering or fire compliance.

Sources and technical guidance

Sources reviewed on 20 November 2026. Check current wording, project conditions and manufacturer specifications.

  1. NEN — NEN 6050:2009, brandveilig werken aan gesloten dakbedekkingssystemen
  2. VEBIDAK — Vakrichtlijn Gesloten Dakbedekkingssystemen 2025
  3. VEBIDAK — Vakrichtlijn 2025 (PDF)
  4. NEN — NEN 6063:2019, brandgevaarlijkheid van daken
  5. Verbond van Verzekeraars — Brandgevaarlijke werkzaamheden
  6. Brandweer Nederland — Het juiste blusmiddel
  7. SOPREMA — Brandpreventie op platte daken

Practical information, not permission to carry out hazardous work. Apply current Dutch standards, building rules, risk assessment, insurer conditions and manufacturer instructions; stop when the construction or risk is unknown.