← Back to knowledge hub
ROOFING WORK PREPARATION & PROJECT PLANNING · 8 min

Flat Roof Survey: Contractor Checklist

A useful flat roof survey goes beyond length and width. Missing upstand dimensions, existing layers, drainage, access and safety risks can undermine both material quantities and the final quotation.

ROOFING · WORK PREPARATION & PROJECT PLANNING

A useful flat roof survey goes beyond length and width. Missing upstand dimensions, existing layers, drainage, access and safety risks can undermine both material quantities and the final quotation.

Quick answer

Record property and roof areas, field dimensions, perimeter and wall flashings, drains, penetrations, rooflights, existing layers, damp evidence, site storage, access and unresolved conditions. Take location-labelled photos.

Sketch and measure each roof field

Measure all roof sections individually. Record edge, wall and upstand runs and count outlets, rooflights, penetrations and corners.

Use marked-up photographs to make later quantities traceable. Irregular roofs need identifiable segments.

Worked example

For illustration, a 7 × 5 m field is 35 m², while its 24 m perimeter is a separate line.

Describe existing layers honestly

Record membrane type, visible build-up, insulation, falls, outlet levels, open seams and moisture signs. Include only conditions actually observed or reliably confirmed.

Mark unknown insulation as unknown rather than guessing thickness. The preparation guide explains further investigation.

Capture access and fall hazards

Assess delivery routes, roof level, openings, rooflights and opportunities for collective edge protection, lifting and safe storage.

Dutch Arboportaal guidance recognises fall hazards even below a 2.5 m height difference. The survey does not replace the formal risk assessment.

Turn observations into project actions

List missing measurements, junction details needing design, and any specialist check of deck, moisture or load capacity.

Send verified quantities to cost estimating and site constraints to logistics planning.

DAKCALC

From roof survey to material list and job record

Use DakCalc’s available roof area, material and document workflows; verify technical details, site safety and system specifications for each project.

Open calculator →

More work preparation guides

Also see: technical roof calculations · roofing quotation.

Frequently asked questions

Is aerial imagery enough for a roof survey?

No. Hidden layers, junctions and risks cannot generally be confirmed from a photo.

How should unknown insulation be recorded?

As an unresolved condition to verify, not an invented number.

What belongs in every survey?

Identified roof sections, measurements, details, photos, access and safety information and outstanding questions.

Sources and references

  1. Arboportaal — Werken op hoogte, maatregelen en RI&E
  2. Arboportaal — Wettelijke regels voor werken op hoogte
  3. DAKMERK / VEBIDAK / Kiwa BDA — Vakrichtlijn gesloten dakbedekkingssystemen 2025

Examples are illustrative and are not a site safety plan or engineered roof design. Verify fall protection, structural capacity, wind loading, methods and product specifications before work.