← Back to knowledge hub
FLAT ROOF CONSTRUCTION & MATERIALS · 8 min

Rc Value vs Rd Value: Insulation Explained

Confusing Rc and Rd can lead to incorrect roofing insulation quotations. A board’s thermal resistance is not necessarily the performance of the whole roof.

FLAT ROOF TECHNOLOGY · DAKCALC KNOWLEDGE HUB

Confusing Rc and Rd can lead to incorrect roofing insulation quotations. A board’s thermal resistance is not necessarily the performance of the whole roof.

Quick answer

Rd describes a material layer; Rc describes the full construction. Use board Rd for product comparison and a verified construction calculation for roof requirements.

Meaning of Rd

Rd is a layer thermal resistance measured in m²K/W. Higher values indicate more resistance to heat flow.

A homogeneous 0.10 m layer with conductivity 0.025 W/(mK) gives an approximate Rd of 4.0.

Practical tip

Use the declared product performance where available.

Meaning of Rc

Rc applies to the building separation as a whole and is determined under the relevant method.

Construction layers, substrate and junctions may affect the outcome. The board Rd alone cannot establish the roof Rc.

Practical tip

Verify the permitted calculation method.

What to include in a quote

State insulation product, thickness and declared layer performance together with the design goal.

A line stating only 100 mm PIR does not establish a complete performance specification.

Practical tip

See the thickness guide.

Dutch renovation rules

RVO explains different regulatory thresholds for general alterations and insulation replacement, including a roof Rc minimum of 2.1 m²K/W in specified replacement cases.

Check the project category and lawful existing level before using any number as a compliance statement.

Practical tip

Consult up-to-date RVO and IPLO material.

DAKCALC

Estimate roofing work with a clear material schedule and cost breakdown

Prepare an initial calculation and verify dimensions, materials, labour and prices before issuing documents.

Open calculator →

Explore the DakCalc flat-roof calculation cluster

Start with the calculation hub, three pillars and practical guides for insulation, membrane quantities and roof details.

Frequently asked questions

Are Rd and Rc the same?

No; one concerns a material, the other the construction.

Is a higher Rd preferable for insulation?

Higher Rd means greater layer thermal resistance.

Are renovation targets always identical?

No; requirements depend on the work category.

Sources and further reading

Reviewed in November 2026. Check current rules and software capabilities before relying on them.

  1. Vakrichtlijn gesloten dakbedekkingssystemen 2025 – VEBIDAK, DAKMERK, Kiwa BDA
  2. RVO – Energieprestatie-eisen verbouw en renovatie
  3. IPLO – Energiezuinigheid bij nieuwbouw
  4. IPLO – Noodafvoersysteem platte daken

General information and illustrative calculations, not personalised legal, tax or technical advice.