← Back to knowledge hub
FLAT ROOF CONSTRUCTION & MATERIALS · 8 min

How Many PIR Insulation Boards Do You Need?

PIR board quantities depend on actual board size, roof area, cutting layout and waste. A simple area division is a starting point, not a final purchase order.

FLAT ROOF TECHNOLOGY · DAKCALC KNOWLEDGE HUB

PIR board quantities depend on actual board size, roof area, cutting layout and waste. A simple area division is a starting point, not a final purchase order.

Quick answer

Divide the net roof area by the area of each board, round up, and then review offcuts, board staggering, pack quantities and usable existing stock.

Measure the complete roof

Measure separate roof sections and mark rooflights and penetrations. Avoid counting overlapping areas twice.

Small holes do not always save a complete board, because the sheet may still be cut around the opening.

Practical tip

Verify site measurements.

Calculate with actual dimensions

A 1200 × 600 mm board covers 0.72 m². A 54 m² roof needs a theoretical 54 ÷ 0.72 = 75 boards.

A 1200 × 1200 mm board covers 1.44 m², giving a different count. Use the exact product sizes.

Practical tip

See the thickness guide.

Allow for cuts

Staggered joints, roof angles and penetrations create offcuts. Some pieces may be reused where the system permits.

Prepare a realistic sheet layout before estimating waste and rounding up to complete packs.

Practical tip

A blanket waste percentage is a provisional allowance.

Separate orders and consumption

Record theoretical usage, installation quantities, packs and warehouse stock separately.

Boards used from existing stock still have economic value but are not new purchases.

Practical tip

Check product suitability and the fixing design.

DAKCALC

Estimate roofing work with a clear material schedule and cost breakdown

Prepare an initial calculation and verify dimensions, materials, labour and prices before issuing documents.

Open calculator →

Explore the DakCalc flat-roof calculation cluster

Start with the calculation hub, three pillars and practical guides for insulation, membrane quantities and roof details.

Frequently asked questions

How much area does one PIR board cover?

It depends on its dimensions; 1200 × 600 mm covers 0.72 m².

Is the theoretical count enough?

Not necessarily, because of cuts and layout.

Does existing stock reduce consumption?

It reduces purchasing, not material used.

Sources and further reading

Reviewed in November 2026. Check current rules and software capabilities before relying on them.

  1. Vakrichtlijn gesloten dakbedekkingssystemen 2025 – VEBIDAK, DAKMERK, Kiwa BDA
  2. RVO – Energieprestatie-eisen verbouw en renovatie
  3. IPLO – Energiezuinigheid bij nieuwbouw
  4. IPLO – Noodafvoersysteem platte daken

General information and illustrative calculations, not personalised legal, tax or technical advice.