Prepare a Roofing Estimate: Materials, Labour and Costs
A roofing estimate should connect every planned task to material, labour and costs. Multiplying roof area by one square-metre rate cannot capture detail-heavy work or unknown underlying conditions.
ROOFING · WORK PREPARATION & PROJECT PLANNING
A roofing estimate should connect every planned task to material, labour and costs. Multiplying roof area by one square-metre rate cannot capture detail-heavy work or unknown underlying conditions.
Convert scope into measurable lines: roof and insulation m², linear edges and flashings, penetration and outlet counts, labour per activity, site safety, access, transport and disposal. Track stock, purchases, cost, markup and VAT separately.
Define the complete scope
Record the specified roof build-up, type of work and what has been verified in existing layers. List assumptions and work subject to further approval.
Use technical calculation guidance and renovation planning for systems. This article focuses on estimating workflow rather than duplicating installation details.
Measure quantities using correct units
Use m² for field membranes and insulation, linear metres or strip areas for edges and upstands, and counts for penetrations, corners and fasteners. Apply product-specific laps and cutting allowances.
See survey measurements and the material ordering guide. Separate installed quantities from new purchase packs.
Estimate labour and indirect job activities
Allocate man-hours to survey, preparation, stripping, insulation, membrane installation, detailing, cleaning and inspection. Show safety, deliveries, site access and waste as explicit items.
An internal labour cost is not necessarily the customer charge rate. Labour planning explains person-hours versus elapsed crew hours.
Review a hypothetical calculation
Assume 12 man-hours at €42 internal cost = €504, materials €590, transport and disposal €105, and safety €95. Illustrative direct costs total €1,294 excluding VAT.
An invented 20% markup produces €1,552.80 excluding VAT. This is not a suggested market rate; markup on cost differs from gross margin on selling price.
12 × €42 + €590 + €105 + €95 = €1,294; €1,294 × 1.20 = €1,552.80 before VAT.
Check quotation and feedback
Review omitted junction work, cost of stock used, risks and supplier quotation validity. Record exactly what the final price includes.
Use the error checklist and general roofing quotation guide before issuing the offer.
From roof survey to material list and job record
Use DakCalc’s available roof area, material and document workflows; verify technical details, site safety and system specifications for each project.
Open calculator →More work preparation guides
Also see: technical roof calculations · roofing quotation.
Frequently asked questions
Is a roof m² rate enough to estimate a job?
No. Junctions, labour, safety, access and waste affect the actual cost.
Should stock material be included in cost?
Normally the material has a cost even when no new purchase is made.
Does a 20% markup equal 20% gross margin?
No, and the example percentage is purely hypothetical.
Sources and references
Examples are illustrative and are not a site safety plan or engineered roof design. Verify fall protection, structural capacity, wind loading, methods and product specifications before work.