How to Write a Roofing Quotation as a Self-Employed Roofer
From roof measurements and material costs to a clear customer quotation: a step-by-step guide with worked figures, checklists and Dutch business rules.

SELF-EMPLOYED ROOFERS · QUOTATIONS · ROOF ESTIMATES
A professional roofing quotation starts with an accurate estimate and clear agreements, not with an attractive PDF. As a self-employed roofer in the Netherlands, you need to explain what you will deliver, which roofing system you will use, what it will cost, what is excluded and how the customer accepts the proposal. This guide takes you from roof survey to a well-defined quotation.
How do you create a roofing quotation? Survey the roof, estimate materials and labour, add equipment and project costs, apply a sustainable margin, and prepare a clear proposal. Include company and customer details, scope of work, material specifications, price and applicable Dutch VAT, scheduling, exclusions, terms, validity and acceptance instructions. Agree variations separately and in writing. The estimate is your working calculation; the quotation is the offer you make to the client.
How to make a roofing quotation: five steps
Following the same sequence for every job reduces overlooked costs and prevents misunderstandings, whether you are preparing a small roof repair or a full flat-roof renewal.
Survey the roof
Measure roof areas, edges, upstands and junctions. Record the existing substrate, site access and the customer's expectations.
Create a material list
Estimate membranes, insulation, upstand and edge strips, perimeter trims, outlets, fasteners and consumables.
Estimate labour and extras
Include preparation, installation, complex details, disposal, hired equipment, travel and subcontractors where relevant.
Set the selling price
Review your cost base, risk allowance and profit margin. Apply the correct VAT treatment to each part of the job.
Prepare the customer offer
Explain exactly what is included or excluded, set a clear price and state the terms, validity and acceptance method.
For broader business guidance, see the self-employed roofer business guide. Calculate your own hourly selling rate with our hourly-rate guide.
1. Begin with a proper roof survey
Many pricing mistakes happen before the document is written. Two roofs with the same surface area can require very different amounts of labour because of rooflights, outlets, high upstands, difficult access or a damaged substrate.
What should you record on site?
- Dimensions and separate roof sections, including extensions and irregular shapes.
- Edge lengths, trim profiles, surface finishes and corner details.
- Upstands, wall abutments, existing lead flashings and proposed replacement details.
- Outlets, emergency overflows, vents, penetrations and rooflights.
- Existing waterproofing, the substrate and any signs of trapped moisture or defects.
- Insulation type, proposed thickness, tapered layouts and fastening requirements.
- Roof access, lifting, scaffolds, edge protection, transport and waste handling.
- Photographs, measurements that still need checking and concealed conditions.
Keep linear metres of edge, wall and upstand work separate from square metres of field membrane. Labour on those details can dominate the job. Assess safe access and installation requirements before promising a method or schedule.
The Dutch guide measuring a flat roof for an estimate provides a practical survey checklist.
2. Turn your survey into a reliable project cost
Prepare your internal cost estimate first; calculate your selling price afterwards. A quotation is not simply a list of supplier prices. Your business also has non-billable time, depreciation, equipment, commercial risk and profit requirements.
Material consumption
Estimate what the roof uses, allowing for actual membrane coverage, laps, trimming waste and technical details.
Purchase quantities
Calculate what you need to order. Rolls, boxes, insulation packs and trim lengths rarely match theoretical quantities exactly.
Existing stock
Stock already on your shelves may reduce purchases, but it still has a commercial value and must be allowed for.
Labour estimate
Allow for preparation, laying the field, edge work, roof details, transport, clearing and handover.
A basic quotation price formula
Your hourly rate should cover business overheads, non-billable hours and sustainable income. Read how to calculate an independent roofer's hourly rate.
Why a 20% mark-up is not a 20% margin
Suppose your costs are €2,000. Adding a 20% mark-up produces a €2,400 selling price and €400 of gross profit, which is only 16.7% of the selling price. To achieve a 20% gross margin on the selling price, divide costs by 0.80: €2,000 ÷ 0.80 = €2,500. Choose the calculation you intend to use.
3. Worked example: a flat-roof quotation
Imagine a rectangular flat roof of approximately 50 m², with an existing roof that inspection suggests is suitable for the proposed scope. You estimate a bituminous roof system, edge details and normal transport. The amounts below are fictional illustrative figures, not standard market prices or a technical specification.
| Item | Explanation | Amount |
|---|---|---|
| Roof membranes and consumables | Rolls, compatible primer where required, upstand and edge strips | €950 |
| Perimeter trims and details | Profiles, connectors, outlet junctions | €380 |
| Labour | 24 hours × €65 estimated selling rate | €1,560 |
| Transport, preparation and disposal | Job-specific expenses | €230 |
| Contingency and project margin | Shown as a separate example allowance | €380 |
| Total excluding VAT | €3,500 | |
| VAT 21% (only if applicable to all items) | €735 | |
| Total including VAT | €4,235 | |
This is a pricing illustration, not a claim that every 50 m² roof can be completed for that sum. Full stripping, additional insulation, scaffolding, complex junctions or a failed substrate change the budget materially. Check that risk and margin are not also included in other items, or you will count them twice.
Present understandable work packages and a clearly stated total. Detailed supplier costs can remain part of your internal calculation, as long as the client knows what they will receive, what it will cost and how unexpected conditions will be handled.
4. What must a roofing quotation contain?
There is no universal statutory quotation template for every Dutch self-employed assignment. However, KVK and Ondernemersplein recommend several standard details. Roofing requires additional clarity about the specification, exclusions and site conditions.
- Your details: trading name, business address, contact details, Dutch Chamber of Commerce registration and applicable VAT ID.
- Customer details: recipient, invoicing address and exact address of the roof.
- Document details: reference or quotation number, date, revision and validity deadline.
- Scope: preparation, roofing system, installation approach, repairs, stripping and disposal where applicable.
- Material specifications: membrane type, insulation, edge trims and any relevant installation or quality requirements.
- Price: understandable items and a total with correct VAT information; a clear VAT-inclusive amount for private customers.
- Timing: expected start and duration, with weather, deliveries and access dependencies.
- Payment: agreed deposit, staged payments, due dates and payment term.
- Exclusions: concealed timber decay, structural repairs, asbestos, hidden moisture damage or work not surveyed.
- Conditions: warranty information, terms and a procedure for variations.
- Acceptance: how the customer approves the specific quotation version.
A phrase such as “renew roof complete with everything” is dangerously vague. Describe roof sections, perimeters, penetrations and flashing work, while identifying concealed conditions that remain subject to inspection.
5. Describe materials and labour clearly
Roof systems and insulation
For bitumen, state the intended membrane build-up, perimeter details and compatible installation method. EPDM and PVC require appropriate systems and edge terminations. Insulation and fasteners must suit the substrate, loading, design and manufacturer instructions. A quotation is not a substitute for a technical roof design, but it should prevent uncertainty about what is being supplied.
Labour beyond the roof area
Estimate cleaning, preparation, stripping or repairs, insulation, membrane laying, upstands, edges, penetrations, lead flashings, cleaning up and handover. When overlaying or repairing an existing roof, allow for addressing blisters or other defects if these tasks are part of the agreed scope.
Scaffolding, fall protection and waste
Make it explicit whether roof access, scaffolding, edge protection, hoists, skips and removal are included. Safety arrangements cannot be left as optional afterthoughts; assess site risks and choose suitable working methods. Agree customer access and areas that need clearing before work begins.
See the independent roofing business guide for the broader estimating and administrative context.
6. Dutch VAT: 21%, 9%, or reverse charge?
21% is the standard Dutch VAT rate for work without an applicable exception. A roofing renovation may contain items subject to different VAT treatments. Labour for qualifying energy-saving insulation on homes older than two years may be subject to 9% VAT, while the insulation materials generally remain at 21%. Other roofing work may also be 21%. For certain construction subcontracting arrangements, the Dutch VAT reverse-charge mechanism can apply.
Do not assume an entire roof replacement qualifies for 9% VAT merely because it includes insulation. Split differently taxed work correctly. Refer to the Dutch Tax Administration's insulation guidance and construction reverse-charge guidance.
7. Validity, terms and customer acceptance
How long should your offer remain valid?
There is no universal fixed statutory validity period for all quotations. Choose a reasonable deadline and print it prominently. Fourteen or thirty days may be commercially practical, but these are not mandatory periods. This matters when supplier prices change quickly.
When does a quotation become binding?
KVK explains that acceptance of a valid offer generally results in an agreement. An email or signed document can be evidence of acceptance. Store the exact accepted version, its attachments and the confirmation. Avoid promising delivery dates or technical results you have not yet verified.
Terms and conditions
Address delivery, payments, liability, warranties, amendments, delays and disputes. Provide terms appropriately before or when entering the agreement. Consumer protection cannot simply be overridden by broad exclusions. See the KVK guidance on business terms.
Consumer cooling-off rights
Online, telephone and off-premises contracts can involve consumer cooling-off rights and information duties. Exceptions depend on the agreement and circumstances. Check the applicable rules before asking a consumer to sign or starting immediately; do not assume every signed quotation is immune from withdrawal.
8. Variations, concealed defects and indicative prices
Roofing work can reveal conditions you could not reasonably see during the survey: decayed timber, soaked insulation, failing perimeter details or unsafe construction. Distinguish work inside the agreed scope from genuinely additional work, and obtain informed approval of the extra price before proceeding whenever practicable.
Fixed contract price
A fixed sum generally gives the customer greater certainty for the agreed work. Not every unexpected difficulty can simply be added to the invoice.
Indicative price
For a Dutch construction contract, a guideline price may be subject to a 10% overrun rule unless the contractor warns about a larger increase in time. The actual contract and circumstances remain important.
ACM ConsuWijzer explains consumer rights concerning fixed prices, guideline prices and additional work. Keep photographs, a written variation, the agreed charge and the client's approval.
Example variation wording
“This price covers only the works described in the quotation. Concealed defects in the supporting structure and repairs not included in the specification are excluded. If additional work becomes necessary, we will discuss the findings and cost with the client and request approval before proceeding, wherever circumstances permit.”
Such wording is illustrative, not a legal waiver. Business-specific terms and consumer rights need appropriate review.
9. Prepare a roof quotation with DakCalc
DakCalc helps turn roof dimensions into an indicative material list and cost estimate. Depending on the job, this can include membranes, insulation, edge and upstand strips, roof trims and selected details. You remain responsible for checking the technical assumptions, actual labour requirement and pricing.
- Enter roof dimensions and relevant extra roof areas, edges and upstands.
- Select the roof build-up and materials suitable for the intended work.
- Check quantities, actual consumption, pack sizes and any existing stock.
- Review labour costs and adjust hours, rates and allowances for your site.
- Prepare the customer offer using the indicative document output and checking every business, client, price and VAT field before sending.
The result is not a substitute for a site inspection, wind design, structural assessment, safety planning or manufacturer specifications. Treat outputs as drafts until verified.
Start with the estimate. Send a quotation you can stand behind.
A clear material list and labour budget help you explain the price to the client—and to yourself.
Open DakCalc calculator →Learn more in the business guide and roofer hourly-rate guide.
10. Seven quotation mistakes that damage your margin
- Charging by roof area alone: upstands, edges, outlets and rooflights are omitted.
- Confusing consumption with purchases: fractional rolls are estimated as though suppliers sell them individually.
- Underestimating labour: preparation, access, details and clearing up are forgotten.
- Unapproved extra work: repairs are completed without agreement on the additional price.
- Incorrect VAT: mixed insulation labour, materials and other work are given a blanket tax rate without checking.
- Vague exclusions: the client assumes concealed defects are covered by the original price.
- Out-of-date versions: changed specifications are not reflected in the price or revision number.
A consistent method does not have to be complicated: measure, calculate, check, explain and record acceptance.
Explore the DakCalc self-employed roofing cluster
This is one of the main guides in our self-employed roofer Knowledge Hub. Related resources connect sustainable rates, quotations and administration.
Our upcoming support articles on bookkeeping, profit margins, labour estimating, purchasing, variations, VAT, PDF quotations and DigiBoox will be linked as soon as their pages are published. This avoids sending visitors to missing pages.
Frequently asked questions about roofing quotations
What should a self-employed roofer include in a quotation?
Business and customer details, a date and quote number, the scope and material specification, price and applicable VAT, scheduling, exclusions, terms, validity and acceptance instructions. Explain how additional work will be agreed.
Is a written quotation always compulsory in the Netherlands?
There is no universal legal template or general written-quote obligation for every job. However, a written proposal is strongly recommended because it records the agreed scope, price and conditions. Consumer rules may impose additional information duties.
When does a roofing quotation become binding?
Usually when the client accepts a valid offer. Evidence can include a signed document or clear email. The precise terms and consumer rights still matter. Keep the accepted version.
What is the difference between a cost estimate and a quotation?
A cost estimate is your internal or indicative calculation. A quotation is the customer-facing offer with a scope, price and conditions. Fixed-price contracts, indicative prices and time-and-materials arrangements have different implications.
Can concealed timber decay result in extra charges?
Not automatically. It depends on the agreed scope, the pricing arrangement, the circumstances and applicable law. Record the defect, discuss the cost and seek approval before doing additional work where possible.
Can an indicative price rise by more than 10%?
Under Dutch construction contract rules, an indicative price may be subject to a 10% overrun rule unless timely warning of a larger increase is given. Check the relevant rules and inform the customer promptly.
Is VAT on roof insulation always 9%?
No. Labour for qualifying energy-saving insulation of a home more than two years old may be taxed at 9%, while insulation materials remain at 21%. Other works may also be 21%, and certain business subcontracting arrangements use reverse charge.
Can DakCalc prepare a quotation?
DakCalc supports initial roof calculations, material lists, cost estimates and a quotation-draft document workflow. Verify technical choices, customer information, prices, VAT and terms before issuing the final customer document.
Should I request an advance payment?
An agreed deposit can help finance purchases and reduce risk on larger projects. Its amount and terms depend on the type of contract, and consumer protections may apply. Check applicable rules before requiring prepayment.
Sources and further reading
Legal and factual content checked against Dutch public guidance in November 2026. Rules can change; official sources and advice for the specific contract take precedence.
- KVK — Nine practical tips for a good quotation.
- Ondernemersplein — Quotation preparation checklist.
- KVK — Drafting terms and conditions.
- ACM ConsuWijzer — Variations and indicative prices.
- Belastingdienst — VAT on insulation work.
- Belastingdienst — VAT reverse charge in construction.
- KVK — From quotation to getting paid.
- Rijksoverheid — Off-premises consumer contract rights.
This is general practical guidance, not personalised legal, tax or technical advice. Every quotation requires a proper survey, appropriate roof system, suitable safety arrangements, correct VAT treatment and contract terms for the specific assignment.
DakCalc self-employed roofing cluster
Explore connected guides on pricing, roofing estimates, quotations and invoicing.