KNOWLEDGE HUB

Practical knowledge for roofers.

Flat-roof guides and practical tips, from taking measurements to preparing a material list.

EPDM, PVC & ROOF MEMBRANE SYSTEMS · 8 min

Estimate EPDM Roof Edges, Corners and Junctions

EPDM roof edges and corners need separate material quantities. Rubber strips, compatible trims, formed corner pieces and fixings are different schedule items with different units.

Read article ↗
EPDM, PVC & ROOF MEMBRANE SYSTEMS · 8 min

Calculate PVC Roofing Rolls, Seams and Laps

PVC roof takeoff should use actual roll dimensions and welding laps. A nominal roll measuring 2 × 20 metres does not automatically provide 40 m² of finished coverage.

Read article ↗
EPDM, PVC & ROOF MEMBRANE SYSTEMS · 8 min

PVC Roofing Welded Seams and Junctions

PVC roofing membranes are connected by controlled thermoplastic welding to form a continuous waterproof layer. Joint quality depends on the exact product, seam cleanliness, equipment, weather and inspection.

Read article ↗
EPDM, PVC & ROOF MEMBRANE SYSTEMS · 8 min

Calculate Mechanical Fixings for PVC Roofing

Mechanically attaching PVC roofing cannot be designed from an arbitrary screws-per-square-metre rule. Wind uplift varies with building location, height, roof shape, perimeter zones and deck resistance.

Read article ↗
EPDM, PVC & ROOF MEMBRANE SYSTEMS · 8 min

Compare EPDM, PVC and Bitumen Maintenance and Life

The service life of EPDM, PVC and bitumen roofs depends on product quality, ultraviolet exposure, weather, foot traffic, detailing and maintenance. One guaranteed lifetime for each material family would be misleading.

Read article ↗
EPDM, PVC & ROOF MEMBRANE SYSTEMS · 10 min

Calculate EPDM, PVC and Bitumen Roof Costs

A fair EPDM, PVC and bitumen cost comparison prices complete installed roof systems rather than comparing rolls or rubber sheet prices alone. Insulation, junctions, crew hours and site protection may differ greatly.

Read article ↗

Articles 79–84 of 152