Calculate PVC Roofing Rolls, Seams and Laps
PVC roof takeoff should use actual roll dimensions and welding laps. A nominal roll measuring 2 × 20 metres does not automatically provide 40 m² of finished coverage.
ROOF MEMBRANE SYSTEMS · EPDM, PVC & BITUMEN
PVC roof takeoff should use actual roll dimensions and welding laps. A nominal roll measuring 2 × 20 metres does not automatically provide 40 m² of finished coverage.
Measure the roof and planned sheet direction, then use real supplier widths and the prescribed lap dimension to lay out the sheets. Allow for end joints, upstands, penetrations and cutting. Separate installed sheet area from rolls purchased.
Survey the roof and sheet direction
Break L-shaped roofs and extensions into separate measured areas. Choose layout based on drainage, roof shape, fixing design and supplier instructions.
Do not assume every PVC manufacturer offers identical sheet widths and roll lengths.
Use prescribed overlap for net coverage
The sheet width minus its lap is the additional effective width of successive sheets. In mechanically attached designs, overlap can also have to accommodate approved plates or fasteners.
See the fixing guide for why lap width and fastening cannot be designed independently.
Check an illustrative roll example
Take a hypothetical 2.00 m-wide sheet with a 0.10 m side lap, giving 1.90 m added coverage for each successive sheet. With a 10 m length, this means 19.0 m² before end seams.
The Dutch guideline specifies at least 100 mm laps for certain concealed mechanically attached PVC designs depending on the fixing element. This is not universal for all PVC systems.
(2.00 − 0.10) × 10 = 19.0 m² of additional coverage, before end joints.
Account for details and actual orders
Schedule upstands, end pieces, corners and compatible profiles independently. Confirm cutting layout, stock on hand and new roll quantities.
See welded seam details and cost estimates.
Estimate roof area and costs; verify the selected roof system
Use DakCalc where its current roof area, material and cost tools match the job. Adhesive rates, welded seam details and wind-uplift fixing layouts are not automatically certified DakCalc designs; use manufacturer data and project-specific specifications.
Open DakCalc →More membrane system guides
See also: APP versus SBS bitumen, roof edge trims for EPDM, PVC and bitumen, Rhepanol (PIB) roofing.
Frequently asked questions
Why is net roll coverage lower than nominal area?
Laps, some fixing arrangements, end seams and cutting reduce coverage.
Is 100 mm universal for all PVC membranes?
No. It applies to certain specified details; follow the actual system.
Does DakCalc create a certified PVC layout?
No. Use manufacturer systems and the relevant fixing design.
Sources and references
Calculations and service-life comparisons are indicative. Verify the selected product, chemical compatibility, installation requirements, fire safety, wind resistance and roof construction; examples are not approved specifications.