How to Repair a Bitumen Flat Roof
Repairing APP or SBS bitumen membranes requires a compatible method and a sound substrate. A patch over the visible hole alone does not address trapped moisture, failed bonding or adjacent roof details.
FLAT ROOFS · REPAIR & LEAKS
Repairing APP or SBS bitumen membranes requires a compatible method and a sound substrate. A patch over the visible hole alone does not address trapped moisture, failed bonding or adjacent roof details.
Confirm membrane condition, moisture and adhesion, prepare the surface in accordance with the selected roof system, treat cracks, blisters or open seams appropriately, and check the watertight connection around the repair.
Identify the existing system
Confirm the membrane type and build-up before deciding on repair materials. Inspect cleanliness, dryness and adhesion. Coatings of unknown origin, trapped moisture and weak existing layers can affect the method.
Do not automatically torch or bond every product in the same way. Consult the relevant manufacturer instructions and the latest roofing guidelines.
Treat defects according to their type
The 2025 Dutch guideline addresses membrane cracks, blisters and high folds separately. Blisters may need controlled opening and leveling, while cracks can require a separation or expansion strip beneath the repair.
See bitumen blisters and membrane cracking for individual assessment.
Measure the repair material
Record defect size and the required overlap around each patch. A small puncture normally requires a larger repair area to connect properly to the sound membrane.
For illustration, a 0.8 × 0.6 m patch represents 0.48 m² of nominal material. Required laps, cutting layout and full strip dimensions determine actual roll use.
This is an arithmetic example, not an approved patch specification.
Control fire safety and interfaces
Hot works near combustible insulation, wall junctions and roof openings carry hazards. Follow the specified fire-safe method and any site hot-work controls.
Local membrane work will not solve leaks through an open wall flashing, roof-edge junction or penetration. Inspect those adjoining details.
Document what was completed
Record surface preparation, repairs, materials and any remaining defects. Provide an itemized quotation for the planned scope and a work order for completed work.
If the surrounding roof is unsuitable for lasting repair, reconsider overlay versus replacement.
From roof inspection to a clear job record
Record the job, materials and labour; verify the repair specification and costs before work starts.
Explore DakCalc →More flat roof repair guides
For roof material calculations: the DakCalc technical guide.
Frequently asked questions
Will any APP patch work over an existing roof?
No. Compatibility, adhesion and system specification require checking.
Is torching always acceptable?
No. Fire-safe alternatives may be required.
Is patch area the same as defect area?
No. Include the required waterproof connections and cutting allowance.
Sources and further reading
Inspection and costing are indicative. Check the roof build-up, moisture, adhesion, wind resistance and fire safety for each project against the relevant system instructions.