← Back to knowledge hub
SELF-EMPLOYED ROOFING & BUSINESS

How to Calculate a Roofing Price per Square Metre

A roof square-metre price is useful for comparing jobs only after every relevant material, edge and labour cost has been included.

Independent Dutch roofer checks measurements and costs on a tablet on a flat roof with bitumen roofing, a tape measure, straight batten, and tools in the foreground. Dutch roofs visible in the background.

SELF-EMPLOYED ROOFING · DAKCALC KNOWLEDGE HUB

A price per square metre seems easy: measure the roof and multiply by a fixed amount. Yet a clear open roof cannot be priced the same way as one with rooflights, many upstands and complex wall junctions. Use the square-metre figure as the outcome of a detailed estimate, never as a substitute for one.

Quick answer

First calculate the full selling price, allowing for membranes, labour, edges, details, access, transport, waste handling, risk and profit. Divide that amount excluding VAT by the quoted roof area. A square-metre rate is meaningless without a clearly defined scope.

Measure the actual roof area

Measure individual roof sections, verify openings and distinguish horizontal surfaces from vertical upstands. Gross roof area alone does not tell you the required quantity of materials.

Use the DakCalc roof estimating workflow to organise the measurement and associated details.

Calculate actual material consumption

Overlaps and cutting losses reduce the useful coverage of membrane rolls. Determine the usable coverage before turning consumption into the number of whole rolls to order.

Include insulation, fixings, edge strips, primer and compatible connections as necessary. Existing stock can reduce new purchases but does not make the material free. See roof material costs.

Roof details drive the labour difference

Large open fields take a different amount of effort from edge trims, outlets, pipe penetrations, corners and flashings. A square-metre labour allowance without detail hours can be misleading.

Estimate time per work activity and multiply it by a sustainable selling rate. Read flat-roof labour estimating.

Worked example: a 60 m² roof

Suppose roofing materials cost €1,750, labour €2,600, access and transport €400, and risk/profit allowances €650. The illustrative selling price is €5,400 excluding VAT.

€5,400 divided by 60 m² equals €90/m² excluding VAT. Different insulation, removal, detailing and site conditions would materially change the result.

Worked / practical example

€1,750 + €2,600 + €400 + €650 = €5,400; divide by 60 m² = €90/m² excluding VAT.

Compare like-for-like roof prices

Check whether each proposal includes insulation, removing the old covering, perimeter trims, outlets, edge protection, skips and warranty provisions. A cheap-looking price may simply omit important work.

Use the quotation guide to describe the included scope clearly.

Why small roofs may cost more per square metre

Even a small roof needs preparation, transport and clearing up. It also has relatively more perimeter work compared with its area.

Treat each project individually and consider the minimum economically viable price rather than forcing every roof into one flat rate.

Check gross margin and VAT

The stated m² price should reflect the final selling amount, not simply underlying purchase costs. Distinguish mark-up on costs from margin on sales.

Check VAT applicable to the different job components. See roofing profit margins and Dutch roofing VAT.

DAKCALC

Estimate roofing work with a clear material schedule and cost breakdown

Prepare an initial calculation and verify dimensions, materials, labour and prices before issuing documents.

Open calculator →

Explore the DakCalc roofing business cluster

Start with the hub, the three pillars and supporting estimating and administration guides.

Frequently asked questions

How do you calculate a roof price per m²?

Divide the full selling price excluding VAT by the horizontal roof area covered by the quoted work.

Can a roofer use one fixed rate per square metre?

Only as a rough benchmark; roof details, access, insulation and work method significantly change costs.

Are roof edges included in the m² rate?

Only when you have separately calculated and explicitly included them in the scope.

Why are small flat roofs expensive per m²?

Preparation, travel, disposal and perimeter detailing are spread over a relatively small surface.

Is a roof price per m² quoted including VAT?

It depends on the quotation. Always state whether the applicable VAT is included.

Sources and further reading

Reviewed in November 2026. Check current rules and software capabilities before relying on them.

  1. KVK – Uurtarief bepalen
  2. KVK – Een factuur maken in 4 stappen
  3. Belastingdienst – Btw-tarieven

General information and illustrative calculations, not personalised legal, tax or technical advice.

From your costs to a clear customer quotation

A selling price per square metre does not explain roof-edge details, outlets, preparation or optional insulation. See the complete homeowner flat-roof cost guide and the 50 m² worked example.

Note: this is general information, not a substitute for technical assessment or product-specific installation guidance.

Need a quick roof estimate?

Use DakCalc for indicative materials and project costs.

Open DakCalc ↗