← Back to knowledge hub
FLAT ROOF RENOVATION & OVERLAYS · 8 min

Removing Old Roof Membranes and Handling Waste

Removing an old roof covering requires more than calculating square metres. Contractors must strip safely, recognize uncertain underlying materials and segregate waste according to the receiving facility's

FLAT ROOF · RENOVATION & OVERLAYS

Removing an old roof covering requires more than calculating square metres. Contractors must strip safely, recognize uncertain underlying materials and segregate waste according to the receiving facility's conditions.

Quick answer

Investigate old roof layers and potential asbestos before demolition. Plan safe access and weather protection, strip in controlled areas, separate bitumen, insulation and other waste as required, and estimate transport from actual layer quantities.

Identify the materials before cutting

Record membrane type, roof age and hidden layer build-up. Milieu Centraal notes that some older bitumen roofing contained asbestos; newer membrane can also cover older hazardous layers.

Where asbestos is suspected, arrange legally appropriate investigation and removal. Do not cut or disturb uncertain materials based on appearance alone.

Practical note

The visible membrane's age does not prove the underlying roof layers are asbestos-free.

Plan access and temporary weatherproofing

Set out safe roof access and fall protection. Break stripping work into areas that can be made weatherproof again within the planned weather conditions.

Account for lifting, manual handling, protection of the building and a contingency for sudden rainfall.

Segregate material according to the waste contractor

The Dutch waste guide recommends collecting bitumen and tar-based roofing separately from other building waste. EPDM must not contaminate bitumen recycling streams.

Confirm acceptance rules for tar, insulation, contamination and suspected asbestos; waste quantities depend on actual layers, not just roof plan area.

Measure time and disposal costs

Record each roof layer and m² stripped, linear metres of removed flashing, labour, safety, transport and container requirements.

Include these separately in renovation costing and the quotation.

Worked example

A 40 m² roof with two membranes remains a 40 m² roof footprint. Actual waste mass and transport volume depend on layer thickness, adhesion and insulation.

DAKCALC

Prepare a traceable renovation estimate

Measure roof areas and junctions, prepare a materials list and estimate hours and costs. Verify the real roof build-up and product requirements before work.

Open the calculator →

More on renovation and roof systems

For the repair-versus-renovation decision: overlay or replace?.

Frequently asked questions

Can old bitumen be mixed with general demolition waste?

Dutch waste guidance recommends separate collection for bituminous and tar-based roofing.

Could old bitumen contain asbestos?

Some older products can; arrange suitable assessment before disturbing suspect layers.

Can EPDM enter a bitumen waste stream?

No, it can interfere with bitumen recycling.

Sources and reference material

  1. Vakrichtlijn gesloten dakbedekkingssystemen 2025 — DAKMERK, VEBIDAK en Kiwa BDA
  2. Milieu Centraal — Asbestdak: herkennen en veilig laten verwijderen
  3. Afvalscheidingswijzer — Dakbedekking, bitumen en teer
  4. RVO — ISDE en actuele isolatievoorwaarden

Examples are illustrative. Roof build-up, moisture, structural capacity, wind loading, fire safety, waste classification and membrane specifications require project-specific checks.