Calculate Rd and Rc: Roof Insulation Examples
Rd and Rc are related but different. Rd is the thermal resistance of insulation material; Rc is the calculated thermal resistance of the complete building element with relevant layers and corrections.
ROOF INSULATION · SUBSIDIES, BBL & ENERGY
Rd and Rc are related but different. Rd is the thermal resistance of insulation material; Rc is the calculated thermal resistance of the complete building element with relevant layers and corrections.
For a homogeneous material Rd = thickness in metres / conductivity λ in W/(m·K). Rc cannot safely be inferred from one PIR board alone. Bbl compliance requires the applicable NTA 8800 method.
Calculate material Rd
Use declared product thickness and thermal conductivity. For homogeneous insulation Rd = d/λ; complex products use documented product performance.
Specify actual manufacturer data instead of assuming one PIR conductivity for all boards.
Review a numeric example
For a hypothetical 0.12 m board with λ = 0.024 W/(m·K), Rd = 0.12/0.024 = 5.0 m²K/W.
That does not by itself establish complete roof Rc or grant eligibility.
0.12 / 0.024 = material Rd 5.0 m²K/W.
Check the complete roof assembly
Rc must include the relevant layers and corrections for fixing and interruptions through the prescribed method.
See statutory Rc thresholds and technical insulation selection.
Keep subsidy and code checks distinct
ISDE sets a minimum newly installed product Rd for ordinary roof insulation; Bbl may require construction Rc.
Verify both independently before specifying or promising funding.
From roof measurements to a traceable estimate
Use DakCalc’s existing material, quantity and cost workflows. Subsidy eligibility, statutory Rc compliance and energy savings are not automatically certified.
Open calculator →More insulation guides
Additional technical reading: PIR, EPS and tapered insulation · roof renovation.
Frequently asked questions
Are Rd and Rc interchangeable?
No. Rd describes a product and Rc the complete construction.
Does material Rd 5 prove roof Rc 5?
No. Full assembly calculation is required.
Can old insulation count for minimum new ISDE Rd?
Not for the newly installed insulation threshold.
Official sources (check for updates)
Content reviewed 13 November 2026. This information is not regulatory or engineering approval. Rates and rules can change; verify eligibility, evidence, moisture safety and structural suitability per project.