← Back to knowledge hub
PROJECT PREPARATION

How to measure a flat roof for an estimate

Record the dimensions, edges and details you need for a first estimate you can check.

Start with a simple sketch. Measure each rectangular roof section separately and record its length and width in metres. Split roofs with extensions into non-overlapping sections.

Measure edges and junctions separately

Mark the edges that need a trim and the sides that meet a wall. Draw outlets, rooflights and other penetrations on the same sketch so you can count them later.

Check your assumptions

Mark estimated dimensions and verify them on site before ordering. Keep material consumption, overlaps and purchase pack sizes separate in your estimate.

Note: this is general information, not a substitute for technical assessment or product-specific installation guidance.

Need a quick roof estimate?

Use DakCalc for indicative materials and project costs.

Open DakCalc ↗