← Back to knowledge hub
ROOF MEMBRANES

How many roofing membrane rolls do you need?

Estimate roof area and allow for laps, upstands and waste.

Flat roof with bitumen roofing rolls, dimensions, and example calculation of the number of rolls needed.

Start by multiplying roof length by width, then check that all roof sections are included.

From square metres to rolls

The nominal area of a roll is not its net coverage. Side and end laps reduce the usable area. Use the real roll length and effective coverage width for the chosen product.

Remember the details

Upstands, edges, wall connections, penetrations and cutting waste require additional material. Keep consumption separate from the actual number of rolls you need to buy: you may already have stock.

Practical tip

Use the DakCalc material list for a first estimate, and verify roll dimensions and manufacturer instructions before ordering.

Note: this is general information, not a substitute for technical assessment or product-specific installation guidance.

Need a quick roof estimate?

Use DakCalc for indicative materials and project costs.

Open DakCalc ↗